noun_1036870_70C041.png noun_1036870_70C041.png  Small Commercial Farm (0-1 Acre)

Scroll down if you already have environmental control and want to build onto it"

Want a turn key environmental control solution?

Thinking of building your dream small commercial farm, and want to have an integrated and modular environmental control system? Look no further – we can help you pick from our suite of hardware, which comes with best in class software, called: agronomist.ai

Where to start? – Well all our customers have a HEART, so lets start here. You need the HEART to access your data, and run the other hardware components listed below. You can also control a few important things
like your lights, feeder pump and web cam. 

THE HEART

 With Antenna - THE-HEART-1.jpg

The HEART is the center of Motorleaf’s monitoring and automation system. It can operate separately to monitor air temperature, relative humidity, and light levels and it can connect to the PowerLeaf, Droplet, Driplet, Space Sensor and Space Sensor Plus to monitor and control what’s important.

  • Control your grow environment.
  • Monitor Air Temperature, Relative Humidity, and Light levels.
  • Control your root feeder pump and lights with an internal timer measured by the second. View your data in graph form.
  • Configure email and desktop alerts for important set points throughout your indoor environment. 
  • Calibrate sensors.
  • Ethernet and Wifi Capabilities.
  • Plug in any USB webcam for crop monitoring
  • Plug in our preferred IP camera for general motion detection and time lapse functionality
  • Online and Stealth Mode (Offline) capability. 
  • Custom alerts only work in online mode (other than via desktop).

Monitoring Solutions

Want to start by just getting notifications on what is happening, and be able to monitor from any wireless enabled device? We’ve got you covered, as all data is collected each 4 seconds, stored onto your HEART and can be accessed from anywhere in the world 24/7 by you, and your team members.

Droplet

With Antenna - DROPLET-BOX-3.jpg

The Droplet wirelessly sends data to the HEART every 4 seconds, monitoring your water reservoir water level, temperature, pH levels and nutrient (TDS) levels. The Droplet can connect wirelessly to the PowerLeaf(s) via the HEART to control reservoir fill pumps, reservoir chillers and reservoir heaters.

Please note that the Motorleaf system requires each customer to purchase 1x HEART unit in order for other units to connect.


The Droplet monitors everything connected to your water reservoir:

1. Water level
2. Water temperature
3. Nutrient concentration
4. pH level

Free 1ft Water Level Sensor Included!

In order to measure the water level you will need a water level sensor.  We offer one FOR FREE with the purchase of the Droplet. 

If you have a large water resovoir tank, we can order a larger one for you - just let us know.

The Droplet comes pre-calibrated and the simple process of re-calibrating the sensors only needs to be done once per year. We don't use cheap sensors, they are built to last.

Space Sensor 

Imagined Space Sensor-1.png

The Space Sensor is a wireless modular device that measures light levels (PAR), relative humidity, temperature and RGB light spectrums.

Space Sensor Plus (+)

With Antenna - Imagined Space Sensor Plus.png

The Space Sensor Plus captures the same data as the Space Sensor, and more. Enjoy a deeper understanding of your environment with Co2, UV and IR light sensors.

 

Control Solutions

Motorleaf can help you manually or automatically adjust your equipment to suit your needs, all via your wireless enabled device; with a mix of on/off based on timer settings, or based upon actual live sensor readings/environmental conditions. Our system allows you to monitor+control up to 250 nodes (techy way of saying ‘things’) at a time.

Driplet

With Antenna - DRIPLET-BOX.jpg

Wirelessly connect the Driplet to your HEART and Droplet to automate the delivery of pH and Nutrients to your reservoir via timer setting, or automated delivery based upon live sensor readings, using 4 peristaltic pumps.

You can even connect the HEART to multiple Driplets, giving you the freedom to dose different reservoir tanks at the same time.

The Driplet can only be installed with a Droplet + HEART connected.

The Driplet controls:

1. pH Up
2. pH Down
3. Nutrient A
4. Nutrient B

Control your reservoir nutrient concentration and pH. 
Customize for different sized reservoir tanks - up to 500 Gallons. 
Accurately dose with 4 peristaltic pumps.

The Driplet is built with multiple fail-safe features in order to prevent unintentional changes of pH/Nutrient mix in the reservoir.

1 - If the Droplet is off, the Driplet disables all pumps since the readings from the Droplet are the basis for manually or automatically controlling pH and nutrients.
2 - If the HEART is off or stops sending acknowledgment packets to the Driplet, the Driplet turns off all the pumps.
3 - If the Driplet can't communicate to the HEART, the pumps are turned off automatically.
4 - If the Driplet refreshes its address in the mesh network, which can take anywhere from 2 - 15 seconds, the pumps are turned off to ensure that no pump is running longer than the predefined ON-time (4 seconds).

PowerLeaf

With Antenna - POWERLEAF-BOX-1.jpg 

The PowerLeaf automates your environment. Provided you have a Motorleaf HEART, each PowerLeaf automates and controls any two pieces of grow equipment, from A/C to feeder pumps, and everything in between. If it turns on and off, you can connect it to the Motorleaf system. The HEART will connect wirelessly with each PowerLeaf and tell them when to turn on/off your equipment based upon pre-set times OR sensor readings from the HEART, DROPLET or SPACE SENSOR/SPACE SENSOR PLUS.

Please note that the Motorleaf system requires each customer to purchase 1x HEART unit in order for other units to connect.

With the Powerleaf you can automate:

Lights

Air Cooler

Humidifier

Heater

Dehumidifier

Fans

Feeder Pump

Reservoir fill pump*
Reservoir chiller*
Reservoir heater*

*Needs Motorleaf DROPLET to be connected

Easily customize setpoints for when your devices will turn ON/OFF

Quickly scale your operation by wirelessly connecting up to 99 Powerleaf’s to a single Motorleaf HEART. Each

Powerleaf can operate 2 pieces of equipment - two of the same kind (example - two heaters) or two different (example - a heater plus a fan).

 

Soil, Hydroponic & Aeroponic: Crop And Size Agnostic 

Motorleaf makes it fast and easy to get started - without the cost and hassle of wires and installs.

Combined Diagrams.jpg

If You Grow Like This, You're In The Right Place!

Motorleaf-BROCHURE Update (August 4th 2018) - Interactive.png

 

Already have environmental control and want to build onto it?

Already invested in an environmental control system? Can’t bring your self to throw it out and do away with all that wiring? Don’t worry- we can still help.

Electric Fuse Box.png

Keep using what you have, but make it MUCH better!

We can help in the following ways:
Add a HEART unit and we’ll have your existing data stream into our amazing agnonomist.ai software.

In addition, collect more data than ever before, via the Space Sensor and/or Space Sensor PLUS.

With Antenna - THE-HEART-1.jpgImagined Space Sensor-1.pngWith Antenna - Imagined Space Sensor Plus.png

With the Motorleaf HEART you can:

  • Control your grow environment.
  • Monitor Air Temperature, Relative Humidity, and Light levels.
  • Control your root feeder pump and lights with an internal timer measured by the second. View your data in graph form.
  • Configure email and desktop alerts for important set points throughout your indoor environment. 
  • Calibrate sensors.
  • Ethernet and Wifi Capabilities.
  • Plug in any USB webcam for crop monitoring
  • Plug in our preferred IP camera for general motion detection and time lapse functionality
  • Online and Stealth Mode (Offline) capability. 
  • Custom alerts only work in online mode (other than via desktop).

 

We’ll even give you the hardware for FREE! – Yes, a HEART worth $500 USD, just pay us a set up fee of $299 and choose the software package that makes sense for your farm!

Agnonmist.ai Small Commercial Farmer Pricing from 3c per sq meter.

Available packages:

Packages-1.png

Contact us for a custom quote! 

CONTACT US